Luminex xPONENT 3.1 Rev 2 (IVD) Manual de usuario descargar pdf (Pagina 27)

FIGURE 8.

Stds & Ctrls Tab

This tab contains the following:

Apply Std/Ctrl Kit - Opens the Select Std/Ctrl Kit dialog box. The dialog box displays the

Std/Ctrl Kit Lot #, Std/Ctrl Kit Name, Expiration, and Manufacturer for the kit. Select a

Std/Ctrl kit from the list and then clickOK to close the dialog box. The kit information will

display in the boxes to the right of the Apply Std/Ctrl Kit button. The selected kit must be

associated with the same analyte names.

Manually type information by clicking in the Name, Std/Ctrl Kit Lot #, Expiration, and

Manufacturer boxes and typing the information.

Assay Standard Information - Displays the selected standard reagents in a list. The list

displays the Reagent, Name, Lot #, Expiration, Manufacturer, and expected concentration

value of each analyte.

• Apply Std Lot - Opens the Select Lot dialog box. Select a lot from the list and then click

OK to apply the lot.

• Apply Values - Applies a value across or down the Reagent, Name, Lot #, Expiration,

and Analyte fields. Type a value in these fields by double-clicking on them and then using

one of the two Apply Values arrows to apply that value down or across the list of analytes.

NOTE: The Dilution list and Apply Dilution button only appear if a

quantitative analysis has been selected.

• Dilution - Contains the following dilution options:

• 1:2 - Halves the standard from each previous iteration.

• 1:10 (Log) - Computes a value of one-tenth of the standard from each previous iteration.

For In Vitro Diagnostic Use

Touring the Software

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 107 108

Sin comentarios

Luminex xPONENT 3.1 Rev 2 (IVD) Manual de usuario Pagina 27