Luminex xPONENT 3.1 Manual de usuario descargar pdf (Pagina 45)

Touring the Software

Create a New MultiBatch

Use this button to add or remove pending batches to the multi-batch set up and to run a

multi-batch. A multi-batch is composed of one or more pending batches which, together,

will fit on one plate. Use the multi-batch feature to conserve plates.

NOTE: You must first create and save pending batches, ensuring that

wells do not overlap. If an overlap exists, edit the pending batch

and select a new “Start at” well.

FIGURE 18. New MultiBatch Tab

This tab contains the following:

Pending Batches. Contains a list of all pending batches. The list includes name, protocol,

date, status, and revision information for each pending batch.

Add Batch. Adds a selected batch to a multi-batch. The selected batch then appears in

the Multi-Batch list. If you select two or more batches with overlapping wells, a Multi-

Batch error dialog box opens, indicating that you must edit one of the selected batches so

that well locations do not overlap.

Multi-Batch. Lists pending batches that you have selected for the multi-batch. The list

includes name, protocol, protocol version, date, and status information for each batch.

Remove. Removes a selected batch in the Multi-Batch list. The batch will still remain in

the Pending Batches section (This button only appears if you have added a batch to the

Multi-Batch list).

Cancel. Returns to the main Batches tab without saving.

Run. Runs the batch.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 139 140

Sin comentarios

Luminex xPONENT 3.1 Manual de usuario Pagina 45