Luminex FLEXMAP 3D Hardware User Manual Manual de usuario descargar pdf (Pagina 30)

CAUTION: Adhere to standard laboratory safety practices when handling

hazardous, toxic, or flammable reagents and chemicals. Contact

Luminex Technical Support when in doubt about compatibility of

cleaning and decontamination agents or materials.

Required Laboratory Reagents

• 10 - 20% household bleach

• 70% isopropanol or 70% ethanol

• 0.1N NaOH

• Mild detergent

• Distilled water

WARNING: Isopropanol and ethanol are flammable liquids. Keep them away

from heat, open flames, and sparks in a well-ventilated area.

Remove them from the instrument when they are not in use.

xMAP Technology Reagents

Luminex

FLEXMAP 3D

Hardware

The FLEXMAP 3D system includes the following hardware:

• The FLEXMAP 3D instrument

• Personal computer (PC) and accessories

• Power cables

• Three sample probes

• Off-plate reagent area

• 96 and 384 heater blocks

• Empty cubitainer for waste

• Sheath fluid intake line

• Waste fluid outtake line

• USB communication cable

• Barcode reader (optional)

• Sample probe height alignment kit

• Monitor arm

NOTE: For information on calibrating the probe correctly, refer to the

FLEXMAP 3D Probe Height Adjustment Tool section.

Recommended Additional Equipment

Successful operation of the Luminex FLEXMAP 3D system may require additional

equipment.

Technical Overview

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 71 72

Sin comentarios

Luminex FLEXMAP 3D Hardware User Manual Manual de usuario Pagina 30