Luminex 200 User Manual with LDS 1.7 Software Manual de usuario descargar pdf (Pagina 30)

Luminex 200 User Manual for LDS Version 1.7 xMAP Technology

3 - 4 PN 89-00002-00-150 Rev. A

• AC inlet fuse: 3 Amp, 250 V~, fast acting

Optics • Reporter laser: 532 nm, nominal output 10-15 mW, maximum

500 mW, frequency-doubled diode; mode of operation,

continuous wave (CW)

• Classification laser: 635 nm, 9.1 mW ± 6%, maximum output 25

mW, diode; mode of operation, continuous wave (CW)

• Reporter detector: Photomultiplier tube, detection bandwidth of

565-585 nm

• Classification detector: Avalanche photo diodes with temperature

compensation

• Doublet discrimination detector: Avalanche photo diodes with

temperature compensation

Fluidics • Sheath flow rate 90 µL ± 5 µL/second

• Cuvette: 200 micron square flow channel

• Sample injection rate: 1 µL/second ± .05 µL/second

• Sample uptake volume: 20-200 µL

Electronics • Reporter channel detection: A/D resolution 14 bits

• Communications interface: USB

Luminex XYP

Specifications

• Ambient temperature: 15°C to 30°C (59°F to 86°F)

• Humidity: 20% to 80%, noncondensing

• Altitude: designed to operate at 2400 m (7874 ft.) above mean

sea level or below.

• Physical dimensions: 44 cm (17.25 in) W x 61 cm (24 in) D x 8

cm (3 in) H

• Weight: 15 kg (33 lbs)

• UL installation category: UL Installation Category II, as defined

in Annex J of UL 3101-1.

• Pollution degree: UL Pollution Degree 2, as defined in section

3.7.3.2 of UL 6101A-1

• Heater operating range: 35°C to 60°C (95°F to 140°F) with

tolerance 0°C to +2°C

• Input voltage range: 100-240 V~ ± 10%, 0.4 Amps, 47-63 Hz

• AC inlet fuse: 2 Amp, 250 V~, time lag

• Communications interface: RS 232

• Shipping and storage: allowable shipping and storage

temperature and humidity ranges, 0°C to +50°C and 20%-80%

noncondensing, respectively

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 153 154

Sin comentarios

Luminex 200 User Manual with LDS 1.7 Software Manual de usuario Pagina 30